JTAGjet-C2000 (Part No. JTAGjet-C2000F-ISO) is a small, palm-sized In-Circuit Debugging Probe for the TMS320C2000 family of DSPs from Texas Instruments. It is equipped with a USB 2.0 port that runs in the High-Speed mode at 480 Mb/sec. This emulator supports the following C2000 DSP devices:
| FAMILY | SERIES | MCU |
| TMS320C24x | Fixed-Point | 16-bit |
| TMS320F24x | Fixed-Point | 16-bit |
| TMS320LC240x | Fixed-Point | 16-bit |
| TMS320LF240x | Fixed-Point | 16-bit |
| TMS320LF240x | Fixed-Point | 16-bit |
| TMS320F2823x | Fixed-Point | 32-bit |
| TMS320F2833x | Fixed-Point | 32-bit |
| TMS320F28xx | Fixed-Point | 32-bit |
| TMS320F2801x, 28044 | Fixed-Point | 32-bit |
| TMS320F28xx | Fixed-Point | 32-bit |
| TMS320F2802x | Fixed-Point (PiccoloTM) | 32-bit |
| TMS320F2803x | Fixed-Point (PiccoloTM) | 32-bit |
| TMS320F2833x | Floating-Point (DelfinoTM) | 32-bit |
| TMS320C2834x | Floating-Point (DelfinoTM) | 32-bit |
Compatible with Code Composer Studio JTAGjet-C2000 is compatible with Code Composer Studio 3.3 up to 6.1 only. It installs directly into the Code Composer Studio directories and becomes visible as JTAGjet probein the CCStudio Setup utility and preconfigured with many C2000 targets. Setting up to work with JTAGjet is just as easy as setting up a TI emulator – just drag and drop the preconfigured target-and-emulator configuration and start CCStudio.
JTAG Chain Device Detection For custom made boards with more than one device on the JTAG chain, JTAGjet can detect all devices on the chain which is necessary in to configure the CCStudio debugger.
Variable JTAG Clock JTAGjet-C2000 supports variable JTAG clock. It defaults to 10 MHz, but may be set as low as 1 kHz (for slow FPGA prototypes or power saving devices) to 15 MHz to provide faster application downloads and quicker Flash programming.
Hardware Features
- Supports TI TMS320C24xx and F28xx DSPs.
- USB 2.0 high-speed port (480 Mbps) provides faster downloads.
- Includes fully isolated JTAG adapter (ADA_ISO_TI14_E).
- Supports all on-chip breakpoints and RTDX.
- Powered by USB port – no external power adapters needed.
- LEDs provide status of target power, JTAG activity, PC host activity and emulator power.
Software Features
- Supports Code Composer Studio 3.3 – 6.1 only
- Includes Flash Programmer utility (does not need CCStudio)
- Detects and graphically shows all devices on the JTAG chain.
- Windows 10, 7, Vista and XP compatible.
Auto-Sensing Voltage JTAGjet-C2000 comes with an active isolation adapter to protect from noisy target applications. The isolation adapter comes with a standard 14-pin TI style compatible header and supports targets from 3V to 5V.
